How do I run the talk timer and send messages to the speaker?

Show the speaker a countdown at the lectern, and send them short messages such as "5 minutes left", from the podium page.

Article Image Alt

What the timer does

Congresses run on tight slots. The talk timer shows the speaker how much time is left, on a screen at the lectern, and lets the technician or the chair send short messages, such as "5 minutes left" or "Please wrap up", without interrupting the talk.

Step 1: Put the speaker's view on the lectern screen

The speaker's view is a second screen of the podium page, for a monitor or tablet facing the speaker.

  1. On the room's podium page, choose Open the speaker's view to open it in a window of its own, and move that window to the lectern monitor.
  2. Or choose Copy the speaker's view link, and open the link on a tablet at the lectern.

The speaker's view shows the countdown in large type, the message, the talk and its speakers, a one-line reference to the slides in use, and the next talk. It is read only.

Step 2: Start the timer when the talk starts

On the talk's row of the podium page, choose Start talk. A countdown of the talk's length starts, on the podium page and on the speaker's view.

The countdown turns amber near the end: at 5 minutes left, or at 2 minutes for a talk of 10 minutes or less. After the end, it shows the time over as "+mm:ss" with "Over time".

The podium page of a room, with the talk timer

Step 3: Control the timer

  • Pause and Resume, for example during a technical problem.
  • Minutes left with Set, to correct the time, for example after a late start.
  • Clock, to show the time of day instead of the countdown.
  • Stop, when the talk ends.

Step 4: Send a message to the speaker

Choose a message from the list:

  • "5 minutes left"
  • "2 minutes left"
  • "Please wrap up"
  • "Time is up"
  • "Please speak into the microphone"
  • "Please repeat the question"

Or type your own short text. Choose Send. The message appears on the speaker's view until you choose Clear message.

The chair can do the same

A chair who manages their session block has the same controls in the speaker portal, on the block's tab On stage, for example on a tablet in the chair's hands. The tab appears once the chair has accepted to manage the block, and the block is on the published agenda.

Good to know: the timer keeps no record of when talks actually started or how long they ran over. If you need this for a report, note it by hand.

Related articles