How do I set up a speaker station?

Put a self-service screen in the speaker ready room, where speakers check and replace their slides before their talk.

Article Image Alt

What a speaker station is

Most congresses have a speaker ready room: a room where speakers check their slides before their talk, and bring a corrected version on a USB stick. A speaker station is a self-service screen for this room. It runs in the browser of a tablet or PC, in your event's colours, with nobody signed in. Speakers identify themselves at the station, see their sessions and the check result of each deck, and replace a deck if they need to.

What you need

  • A tablet or PC with a browser and an internet connection. A device with a camera lets speakers hold up their badge or e-ticket.
  • Optionally, a barcode scanner for badges.
  • Your speakers' slides collected through run.events. See How do I collect speakers' slides before the congress?.

Step 1: Create the station's key

  1. On your event home, open Badges and Check-In, then Kiosk app setup.
  2. Choose Create New Configuration Key.
  3. Under Configuration key type, choose speaker station.
  4. Add a Comment that names the station, for example "Speaker ready room, desk 1".
  5. Save.

Step 2: Open the station on its screen

  1. In the station's row, choose the QR-code icon. The fly-out Configuration key opens, with the station's address and "Open this address on the station's screen."
  2. Choose Copy link, and open the address in the browser of the station's device. Or scan the QR code in the fly-out with the device.
  3. Put the browser in full-screen mode.

Kiosk app setup, with the configuration keys of the stations

Keep the station's address like a key: it opens the station without a sign-in. Do not send it by mail.

For several desks, create one key per device.

What the speaker does at the station

The start screen says what the station is for, "Check your slides before your talk", in three steps. The speaker gets in in one of four ways:

  • holding up their badge or e-ticket to the device's camera;
  • scanning it with a scanner;
  • Use your e-mail: typing their address and the one-time code that run.events mails them. The code works only at that station;
  • scanning a QR code on the screen, to open the speaker portal on their own phone.

The speaker then sees their sessions, with room and time, and each deck's check result. They can replace the deck, give the consent to publish, and fill in the speaker agreement. When they are done, they choose Done, and the station clears itself. It also clears after two minutes without a touch.

The speaker station showing a speaker's session with its deck and check result

When the station refuses a new deck

The station follows the same rules as the speaker portal. It refuses a new deck when:

  • the upload deadline has passed, and any grace date with it;
  • the deck is locked, by hand or automatically some hours before the session;
  • the speaker agreement is not filled in yet;
  • the deck is not one the speaker added themselves.

The speaker then reads, for example, "The deadline has passed. Please contact the organizers to send this material." Your staff in the ready room can then upload the deck on the session's tab Materials, which organizers can always do while the deck is not locked.

The station handles slide decks only. Posters and other materials are shown, but cannot be replaced there.

What the station does not do

  • No downloads: the screen is shared, so speakers cannot take files away.
  • No check-in: signing in at the station does not mark the speaker as present. The check-in counts on the Sessions page come from the event's own check-in at the entrance.
  • No overview of the lectern PCs: the station does not show which deck each room has opened.

After the congress

Deactivate or delete the station's key in Kiosk app setup. See How do I switch off the podium links and station keys after the congress?.

Related articles